Brand Name |
Crown Trade
|
Colour |
Grey
|
Material |
N/A
|
Manufacturer Model No |
AD056510F
|
Wear Type |
N/A
|
Type |
Paint
|
Certifications Met |
N/A
|
Country of Origin |
N/A
|
Protects From |
N/A
|
Waterproof |
N/A
|
Number of Pockets |
N/A
|
Size |
5L
|
Application Methods |
Brush, Roller
|
Coverage |
Up to 15sq/m per litre
|
VOC level |
High
|
Thinning |
Not Recommended
|
Touch dry |
1-4 hours
|
Recoatable |
4-8 hours
|
Scrubbability |
Washable
|
Finish |
Satin
|
Cleanup |
Brush cleaner or White spirit
|
For Interior Use |
A fast drying decorative solvent-borne paint with a semi gloss finish for use on correctly prepared concrete floors. Suitable for use in light traffic areas such as shops and showrooms.
|
Preparation |
Ensure all surfaces are sound, dry, clean and free from dirt, oil, grease or other contamination. Ensure all loose and flaking material is removed to a firm sound edge. Untreated floors: An effective damp proof membrane must be present beneath concrete and masonry floors. Remove surface latence using a proprietary cement cleaner to instructions. New concrete must be left at least six months to dry out in depth before painting. Previously painted floors: Thoroughly sand, rinse and remove all residues. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Do not apply over bituminous or asphaltic composition or certain treated floors. Crown Trade Concrete Floor Paint should not be used where it is likely to be in contact with standing water. Power floated floors should be surface etched by blast treatment.
|
Application |
Stir thoroughly. Always intermix packs for colour consistency. Please check for colour accuracy prior to application. Crown Paints is not liable for decorating costs caused as a result of an incorrect colour being applied. Apply by brush or roller. Untreated floors: Apply the first coat of Concrete Floor Paint thinned with up to 10% white spirit. For the second coat use as supplied. Previously painted floors: Any bare areas prime as for untreated floors. Apply one or two coats of Concrete Floor Paint as supplied. Do not apply in temperatures below 8°C or in high humidity. Note: in some instances a third coat may be necessary.
|
Spreading Capacity |
Up to 15m² per litre on a smooth non absorbent surface.
|
Drying |
Touch dry in 3 hours. Recoatable after 6 hours, depending on conditions and film thickness.
|
Cleaning |
Clean equipment with a proprietary cleaner immediately after use.
|
Transportation and Storage |
Ensure this pack is stored upright and secure at all times. Crown Paints Ltd cannot accept liability for damage caused by spillage. Do not store below 5°C or above 40°C.
|