Heatmiser 4 Zone wiring Centre 230V. Could be used in conjunction with Heatmiser's mains voltage thermostats. Perfectly controls a single zone of radiation but is also suited for underfloor heating. Central switching (up to 4 zones). Output for a hot water cylinder, pump and the system boiler.

Brand Name	Heatmiser
Colour	N/A
Material	N/A
Manufacturer Model No	UH4
Wear Type	N/A
Type	Wiring Centre
Certifications Met	Not EST approved
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Length	384mm
Height	148mm
Depth	60mm
Weight	0.8kg
IP Rating	IP20
Supply	230V AC ~ 50Hz 1 Phase
Relay load max.	3Amp
Total load max.	5Amp
Warranty	2 years manufacturer's

The Heatmiser 4 Zone Wiring Centre can be used in conjunction with mains voltage thermostats. It is ideally suited for underfloor heating but can also control a single zone of radiators. It provides central switching of up to 4 zone actuators and has an output for a hot water cylinder and the system boiler and pump.

Brand Name	Heatmiser
Colour	White
Manufacturer Model No	UH4
Certifications Met	All images and text, © Copyright City Electrical Factors Ltd
Depth	60mm
Dimensions	(H)148 mm x (W)384 mm x (D)60 mm
Finish	White
Guarantee	2 Years
Height	148mm
IP Rating	IP20
Packaging Types	Each
Unspsc V18	39121523
Unspsc V24	39121523
Voltage Rating	230V
Weight	0.91kg
Width	384mm

The Heatmiser UH4 is a versatile wiring centre designed to work seamlessly with mains thermostats, particularly well-suited for underfloor heating applications. It allows central switching and control of up to four zone actuators, and provides outputs for a hot water cylinder, system boiler, and pump.

Brand Name	Heatmiser
Colour	string
Material	string
Manufacturer Model No	UH4WIRINGCENTRE
Wear Type	string
Type	Wiring Centre
Certifications Met	string
Country of Origin	string
Protects From	string
Waterproof	string
Number of Pockets	string
Supply	230V AC
Relay Load Max	3A
Total Load	5A
IP Protection	IP20
Dimensions (L,H,D) mm	384x148x60mm
No. Heating Zones	4
No. HW Zones	1
Weight	800g
Heating Type	Underfloor Heating

The UH4 is an 4 Zone & Hot water wiring centre for use with Heatmiser 230v thermostats. The UH4 can be used to control any actuator or valve which requires a 230v AC signal. At the same time the UH4 offers the ability to operate a boiler or other heat source through a volt free output. The UH4 is also ideally suited for underfloor heating but can also control a single zone of radiators.

Brand Name	Heatmiser
Colour	N/A
Material	N/A
Manufacturer Model No	UH4
Wear Type	N/A
Type	Wiring Centre
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Controls	4 heating zones
Supply	230v AC 50Hz 1 Phase
IP Protection	IP20
Installed Dimensions	(L)384 x (H)148 x (D)60mm
For use with	Heatmiser 230v thermostats
Output for	hot water cylinder and the system boiler and pump