Copper Crimps are used to anchor seagull wire to posts and springs.     1. Thread one crimp onto the wire     2. Thread the wire through the eye of the seagull post or the spring     3. Feed the wire back through the crimp, forming a loop that contains the seagull post or spring     4. Slide the crimp towards the post or spring for a snug, neat fit, leaving a small tail of approx 10-20mm     5.Compress the crimp using a Bird Wire crimp tool PW241 so that the two sections of wire are compressed together and held fast Description Copper crimps for securing 0.96mm Seagull Wire to Gull Posts and Gull Wire Micro Springs 1 CU DIN for use with 0.96mm wire Sold in packs of 100 Use either with our bird wire crimp tool or our ratchet crimp tool. Where to Use To fasten Gull Wire. Use 2 crimps on each end.