Have you ever wanted to install a toilet, washbasin or shower but not had the right plumbing in the right room to manage it? With the Sanislimthis is a problem of the past! They’re designed to take waste all the waste from a small bathroom and pump this to the sewage network.The beauty of this particular appliance is that it’s only 145mm deep making it ideal for installation behind a toilet. It also features inlets on either side of the unit so that a shower or a washbasin can also be fitted without any issues.The Sanislim is ideal for installation in a basement or loft conversion, or in any home improvement situation where large bore pipework isn’t practical.The unit pumps waste away through 22mm small-bore pipework, this can be up to 2.5 metres vertically or up to 40 metres horizontally (or a lesser combination of both).Saniflo cover this appliances with an incredible 2 Year guarantee.Product Overview:Designed for use with a toilet, shower, basin & bidet.Suitable for domestic applications. Features and Benefits:Small bore macerator pump.Deals with all waste associated with small bathroom suites.2 Year manufacturer's guarantee.This is not supplied with a toilet. Technical Data:Average temperature: 35°CDischarge Pipe Diameter: 22 / 32mmCompatible with WC, showers, washbasin and bidet.Electrical Supply (V/Hz): 220-240 / 50Iso: EN 12050-3Min. Gravity Fall on Horizontal Run: 3mMotor Speed: 2800rpmWattage: 400Only 145mm depth required behind the WC. Clearance of 320mm is required from floor level to the underside of a close coupled suite to accommodate the discharge elbow Discharge Lengths:Vertical Discharge: 2.5mHorizontal Discharge: 40m Dimensions:Height: 447mmWidth: 131mmDepth: 145mm Do not dispose of the following through the unit:Aggressive chemicals such as solvents, acids, paint strippers etc.Use a non-foaming brand disinfectant or deodorant to help clean the items and Saniflo unit.Avoid block cleansers affixed to the WC pan. Saniflo Do Not Accept Returns If your Saniflo macerator is faulty then you will need to call out an approved Saniflo engineer. Saniflo will not accept returned product for hygiene reasons and require any fault to be verified on site by the engineer. Engineers aim to be with you in 48 hours although longer delays are possible 5 Saniflo Problems and How To Fix Them You may not need to replace an old Saniflo unit. Below are five common problems associated with Saniflo brand macerators and some quick tips on how you can fix them. The Saniflo Is Giving Off a Terrible Smell ! Bad smells can be due to a build-up of limescale and human waste in the 2-3 inches of water that’s always left in the Saniflo. Other Macerator brands have self-cleaning technology, but Saniflo’s need to be descaled regularly. If you’ve never descaled your macerator then you may have to do this a few times to clear the smell. The Saniflo Keeps Tripping The Electrics If your Saniflo is tripping the electrics, it usually means that water is getting into it and leads to the circuit shutting off to avoid any other damages, or there’s a loose wire. Always make sure the electrics are off before you inspect the pump. If there’s an issue with the motor seal, then call a certified Saniflo engineer to repair it. If the motor is worn or faulty, this unfortunately means that you’ll have to purchase a new macerator.   The Saniflo Starts On its Own! There could be a few reasons as to why your pump keeps starting on its own throughout the day and night: (Excluding the possibility of a ghost!) The microswitch is misfiring because it keeps thinking the tank is full – you will have to manually remove the waste between the switch and the tank floor and then reset the pump. If the rubber membrane is damaged, waste can then get into the switch and cause a problem. In this case, you will have to purchase a new rubber membrane and switch. Saniflo Leaks During Operation One reason for your Saniflo leaking from the vent could be that there is a big build up of waste inside which will have to be manually removed. It’s also possible that the motor is nearing the end of its life and can’t work as hard as it used to. This would mean the whole macerator should be replaced. The rubber waste outlet could have shrunk because of too much toilet cleaner. If water is spraying out the vent, you will need to replace the rubber waste outlet.   Saniflo Vibrates & Buzzes Loudly If when flushing the toilet you hear a horrible vibrating noise, there’s probably something that has been lodged in the macerator blade. Turn off the Saniflo and remove the lid. If you see an obstruction straight away, remove it. If the foreign object is in the blade you can remove it using small pliers.             How it Compares To The Competition 4 Inlets A 4 inlet macerator connects to a toilet and 3 of the following products: Washbasin Shower Urinal Bidet Inlet size: 100/40mm Outlet size: 22mm

Brand Name	Saniflo
Colour	White
Country of Origin	France
Manufacturer Model No	1054
Type	Macerator Pumps