The Trend T33A M Class Wet & Dry Vacuum with auto-start power take off (1,500W for 240V and 1,000W for 110V). This allows the extractor to auto-start when a power tool is connected with a 3–5 second run-on delay to clear residual debris. Durable construction, with a heavy-duty plastic tank. Ideal for dual function pick up. When dry vacuuming, a dust bag can be fitted for increased efficiency and safe disposal. There is also an auto-stop function when liquid capacity is reached and a liquid drain-off port at the bottom of the tank for easy emptying without lifting. Easy to maintain. The low flow indicator signals when the extraction power is low, prompting you to clean the filter. A push-button shakes the filter, clearing out fine dust build-up and helping to maintain efficient suction power. Fitted with four swivel castors for easy manoeuvrability around the jobsite. It also has a wide working range thanks to the 5m hose and 5m cable for extended working distances from a power point. Meets HSE Construction Site regulations to capture microscopic harmful dust particles, including silica and MDF dust. 99.95% CAPTURE High-Performance H13 Pleated HEPA Filter System traps dust as fine as 0.3 microns and above. Supplied with a full set of cleaning tools for general vacuum cleaning purposes. Specification: Input Power: 240V 1,200W, 110V 800W Power Take Off: 240V 1,500W, 110V 1,100W Capacity (Wet/Dry): 17/25 litre Hose Length: 5m Cable Length: 5m