B-I-N is the ultimate shellac-based primer, sealer and stain killer. It is perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. B-I-N permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, it may be used in areas where incidental contact with food items occur.Application - Shake or stir before using. Eliminate all sources of ignition. Apply with a natural or synthetic bristle brush, roller or sprayer. Follow manufacturers instructions when using spray equipment. DO NOT THIN. If B-I-N thickens in the container due to solvent evaporation, add a small amount of methylated spirit. When spraying, dilute with methylated spirit up to 2% - refer to technical data sheet. Apply when air and surface temperature is between -18C to 32C, relative humidity is less than 85% and surface temperature is 9C above the dew point.Coverage - 12.5 m2 per litre. Coverage may vary depending upon method of application and surface porosity.Drying Time - At normal temperatures B-I-N will dry to touch in 15 minutes and can be recoated in 45 minutes. Paint spot-primed exterior surfaces after they dry. Lower temperatures, higher humidity, and the addition of tint will prolong dry and cure time of the product.

Brand Name	Zinsser
Colour	White
Manufacturer Model No	ZN7020001D1
Type	Masonry-Metal