| Brand Name |
SPARES2GO
|
| Colour |
Silver
|
| Material |
N/A
|
| Manufacturer Model No |
5057817579873
|
| Wear Type |
N/A
|
| Type |
Angled
|
| Certifications Met |
N/A
|
| Country of Origin |
N/A
|
| Protects From |
N/A
|
| Waterproof |
N/A
|
| Number of Pockets |
N/A
|
| Manufacturer guarantee |
6 months
|
| Compatibility |
Suitable for the majority of standard toilet pans / bidets / semi pedestal basins. ***Please carefully check images and measurements to confirm suitability before purchase.***
|
| Kit Contains |
2 x Angled Brackets -- 2 x Hex Screws -- 2 x Metal Washers -- 2 x Plugs -- 2 x M6 Screws -- 2 x Nylon Bushes -- 2 x White Cap Covers -- 2 x Chrome Silver Cap Covers -- Illustrated Installation Instructions
|
| Fits Models |
UNIVERSAL - Suitable for the majority of standard toilet pans / bidets / semi pedestal basins.
|
| Installation Instructions |
***See installation image above for corresponding lettered items*** -- 1. Check and familiarise yourself with all the components. -- 2. Prior to carrying out the work, check the position of the W.C -- 3. Once happy with the position, mark on the floor directly in line with the holes on the side on the W.C. pan. -- 4. Take the W.C. pan away and from the marks on the floor then draw a horizontal line approximately 50mm in where the pan would be. This is where to drill holes in the floor at a depth of 60mm. -- 5. Once the holes have been drilled, insert nylon plug (D). -- 6. Place the angle bracket (C) over the hole and use hex screw (A) and metal washer (B) to secure it to the floor. The angle bracket position can be adjusted if required, by sliding it forward or backward. -- 7. This should be repeated on both sides. -- 8. Place the pan carefully over the W.C. angle brackets into position. -- 9. Insert nylon bush (E) into holes in the side of the W.C. pan. -- 10. Take steel screw (F) and tighten through the nylon bush (E) into the angle bracket (C), be careful not to over tighten. -- 11. To finish place cap (G) over nylon bush (E). -- 12 . Finally check installation and ensure pan is secure to the floor and does not move.
|
